Thursday 21 February 2013

Android 4.1.1 Jelly Bean ROM for Samsung Galaxy Ace GT-S5830i


Android 4.1.1 Jelly Bean ROM for Samsung Galaxy Ace GT-S5830i is now available from Android Developers. The Jelly Bean ROM for Galaxy Ace 5830i from is named as Jelly Blast (jellyblast). You can upgrade your phone to Android 4.1.1 Jelly Bean Operating System by installing this custom ROM. After installing the rom you can find your phone has upgraded to Android 4.1 Jelly Bean version in About phone option under settings menu.
The Samsung Galaxy Ace S5830i is normally comes with Android 2.3 Gingerbread as an Operating System. There is no official Android 4.0 Ice Cream Sandwich upgrade from Samsung mobile Support. Because the phone’s hardware configuration is not supported for the upgrade. The Phone is comes with 832 MHz processor, 5 Mega pixel camera, 3.5 inch capacitive touch Screen. Galaxy Ace s5830i is capable to run Jelly Blast custom ROM Android 4.1.1 Jelly Bean on your phone.
samsung galaxy ace s5830i jelly bean blast rom photos

Warning:

  • We are not responsible for any damages that may happened due to using this ROM. If any problem happens that related to installing, we will help you to solve it.
  • Use this guide at your own risk. We shall not have any liability or responsibility for whatever happens to you and your device by using the instructions in this guide.
  • The instructions provided in this tutorial for educational purpose only. There is no guarantee that these steps will work for your device.
  • The steps given in this tutorial is only to use with Samsung Galaxy Ace and the model number S5830i. Applying this guide to any other device or any other model may produce many problems.
  • Read and Understand the whole tutorial first, before going to perform the steps.

Pre Requirements:

  • SMS – How to Backup Messages
  • Contacts – Sync with Gmail App
  • Videos, Images, Songs and Other Files – Copy to internal / External SD card or System
  • APN Settings – Take Manual Note from “Settings > Wireless & Networks > Mobile Networks > Access Point Names
  • Then maintain minimum 60% charge in your phone’s battery. This will help you to don’t get switched of your phone.
  • And disable any antivirus and firewalls too.

How to install Android 4.1.1 Jelly Bean Jelly Blast ROM on Samsung Galaxy Ace S5830i:

  • Download the ROM JELLYBLASTV3.0.3_Ported_For_S5830I.zip – 133.04 MB – Here
  • Transfer the downloaded file to your SD card by USB cable.
  • Switch off your phone and reboot into recovery mode.
  • To open recovery mode, press HOME + POWER + VOLUME UP button together.
  • Then you will move on to custom Recovery.
  • Then select the option, “Install zip from SD card”
  • After that select “Choose zip from SD card”
  • Now choose the downloaded file.
  • And confirm the selection in next page.
  • Wait for the process finish.
  • In few minutes your phone will says completed message in recovery screen.
  • Then select “reboot system now” option to reboot your phone.
  • Note: First boot takes some long time. It will install the updates on first time.

35 comments:

  1. hello
    i need to inform you about this ROM
    The ROM is really nice but i am having some problems

    1. GPS is not working.
    2. OTA is not working.

    ReplyDelete
    Replies
    1. hey der is solution for fix the bug which cant make calls nd get msg to me..???,,,if u knw pls tell me...!!

      Delete
  2. i lost my imei no. please help

    ReplyDelete
    Replies
    1. ronak i have a solution for lost imei no i give u the solution and for others u can tutorial please reply me if want to help others losting there imei

      Delete
    2. yes i want solution .give me plzz so that i can help others.

      Delete
    3. ronak
      just follow these step
      (kernel-201211201515-E3-boot.img.zip)
      http://www.4shared.com/zip/tr97nOTt/kernel-201211201515-E3-bootimg.html

      (modulos201211201515-modules.zip)
      http://www.4shared.com/zip/Kw1y85uV/modulos201211201515-modules.html

      1. copy the 2 zip files to your sd-card.
      2. boot into clockworkmod
      3. install jellyblast (jelly-blast not supplied)
      4. dont restart after installation
      5. select install zip from sd
      6. select choose zip from sdcard.
      7. first select kernel-201211201515-e3-boot.zip
      8. after install complete dont restart.
      9. next choose the file modulos201211201515-modules.zip.
      10. restart

      Delete
  3. 1. is it possible to fix gps.
    2. can i run cyanogen after doing this.

    ReplyDelete
  4. Invalid or deleted file!!!
    ROM JELLYBLASTV3.0.3_Ported_For_S5830I.zip – 133.04 MB – Here

    ReplyDelete
  5. 4.1 software installed.the network has a problem.emergency assistance.my adress.kzlvedat@gmail.com

    ReplyDelete
  6. AFTER UPDATION OF JELLY BEAN -IMEI NO WIPED AND SIM NOT WORKING
    HOW TO FIX IT ?
    IT VERY PAINFUL DUE TO WE SPOIL WARRANTY

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
    2. Download galaxy toolbox from play store before installing rom and backup efs.

      Delete
  7. headphones not working...how to fix it??

    ReplyDelete
  8. installation gets aborted

    ReplyDelete
  9. arkadaşlar ben de yukledim ama S YAZISI GELİYO GİDİYO telefon başlamıyoda napacam bi yardım brick felan olmadı demi bu

    ReplyDelete
  10. cevaplarını bekliyorum ne olur bi yardım

    ReplyDelete
  11. It is taking so much time to reboot. I'm stuck at Jelly blast page. The screen is going down and coming up with JellyBlast logo. Its almost 4hrs. mine is Samsung Galaxy GT-5830i.. Please help me what to do now?

    ReplyDelete
    Replies
    1. I just rebooted my Phone and it worked successfully.. thanks

      Delete
  12. you can backup your efs folder who contains imei no of your phone..
    other way is download kernal and modulus file. to get back your imei no

    ReplyDelete
  13. (kernel-201211201515-E3-boot.img.zip)
    http://www.4shared.com/zip/tr97nOTt/kernel-201211201515-E3-bootimg.html

    (modulos201211201515-modules.zip)
    http://www.4shared.com/zip/Kw1y85uV/modulos201211201515-modules.html

    1. copy the 2 zip files to your sd-card.
    2. boot into clockworkmod
    3. install jellyblast (jelly-blast not supplied)
    4. dont restart after installation
    5. select install zip from sd
    6. select choose zip from sdcard.
    7. first select kernel-201211201515-e3-boot.zip
    8. after install complete dont restart.
    9. next choose the file modulos201211201515-modules.zip.
    10. restart

    ;) enjoy

    ReplyDelete
  14. after installiing those kernel and module my phone is not getting on can anyone help me plz..

    ReplyDelete
  15. how much time will it take???????? it's 20 minutes already!!

    ReplyDelete
  16. this is bullshit.. its causing my phone lots of problems

    ReplyDelete
  17. how can i get back me samsung galaxy ace ginhgerbread 2.3.6 after i update my phone to 4.1.1 jellyblast .. can i still get back my original rom firmware? plss help .. i got samsung galaxy ace s5830i .. i really really want to be it in original firmware

    ReplyDelete
  18. This comment has been removed by the author.

    ReplyDelete
  19. How to get back to original firmware on samsung galaxy ace s5830i if jelly blast rom v3.0.3 is installed

    ReplyDelete